Body Lift - Motor Mount Lift
JKS 1-1/4" Body Lift 1" Motor Mount Lift
JKS 1-1/4" Body Lift Kit
Loosen 11 Body Bolts, Remove Bolts One Side at a Time
Slowly Jack Up One Side
Use Longer Bolts, There Are Two Sizes
I Used Blue Locktight on All 11 Body Bolts
Insert Body Lift Pucks, but Don't Tighten Completely
Move to Opposite Side, Install Pucks, Tighten All Bolts
Do not Over Tighten
Remove Original Radiator Bumpstop
Spray with Windex, Push Up and Rotate Back and Forth (PITA)
Transfercase Shifter Relocation Bracket
Pull Back Driverside Carpet
Remove (4) Transfercase Shifter Bracket Bolts
Transfercase Shifter Bracket
1" & 2" BL Relocation Bracket, Notice Elongated Holes
The Center Shaft Hole Overlaps Relocation Bracket
I had To Elongate the Holes to Allow Shaft to Fit
Transfercase Shifter Bracket with Relocation Bracket
Re-Install Transfercase Shifter Bracket
Tighten Bolts and Replace Carpet
I had to Adjust Transfercase Shifter Rod
It Wouldn't Go in 4WD LO
JKS 1" Motor Mount Lift
I have Air Conditioning
This Made This Installation a Little More Difficult
Job Complete and Worth the Effort, Yeah!
