Dana 44 Installation
The Three Major Components of the Swap
Alloy USA Chromoly Axle Kit
Dana 44 - 30 Spline
Makes The Dana 44 Bullet Proof !
Powertrax No Slip Locker
Jeepsareus New Dana 44 - 3.73 Gearing
Remove Carrier, Notice New Shim Location
Install Powertrax No Slip Locker in Stock Carrier
Reinstall Carrier in Dana 44 Axle Housing
Install Brake Lines and Vent from Dana 35
Jack Dana 44 into Positions and Re-Attach
Control Arms, Springs, Shocks, Trackbar,
Stabilizer, and Brake Line Connections
Bolt Up Drive Shaft from the Dana 35
Pull Lug Bolts into Dana 44 Shafts
One Down, Nine To Go
Time to Press the Bearings on the Shaft
Put Retainer, Seal, Bearing, and Ring on Shaft
Press Bearing and Ring onto Dana 44 Shaft
Pressed Dana 44 Axle Shaft Ready to Install
Re-Attach Brake Backing Plate
Insert Shaft Through Brake Backing Plate
Bolt Up Retainer Plate to Secure Axle Shafts
Re-Mount Dana 35 Drum Brake
